1
/
/
8
香薰融蠟燈 送價值$128天然椰子油香薰 香薰暖燈 可調教光度 可定時 3017
香薰融蠟燈 送價值$128天然椰子油香薰 香薰暖燈 可調教光度 可定時 3017
- Ideal Gift
- Limited Time Offer
- Local Free Shipping
定價
HK$298.00
定價
HK$330.00
售價
HK$298.00
單價
/
每
結帳時計算運費。
無法載入取貨服務供應情況
限時優惠 送價值$128天然椰子油香薰一件&額外一枚價值$39燈泡一個!
產品特色:
• 香港三腳插頭 &兩年保養
• 透過簡單的按鈕操作,取代傳統明火點燃方式,輕鬆釋放香氣。
• 只需幾分鐘,您就能享受到宜人的香氣,即使家中有寵物或小朋友也能安全使用。
• 透過調整亮度,您可以自行控制融蠟的速度,進而決定香味的濃度。
• 具備定時功能,能夠自動關閉,避免長時間運行造成的安全隱患,同時幫助節省能源,延長蠟燭的使用壽命,讓您在享受香氛的同時更加安心。
產品包含
• 融蠟燈X1
• GU10燈膽X2
• 香港三腳插頭 X1
• 2年保養





安全須知 Safety Instructions
1. 通電前,確保燈泡完全旋入燈泡底座內(轉不動爲止) Before powering on, ensure the bulb is fully screwed into the socket (it should not turn anymore).
2. 蠟面離燈泡不宜過近 The wax surface should not be too close to the bulb.
3. 適合各品牌蠟杯型的蠟燭使用,裸蠟、石蠟不建議使用。Suitable for use with candle cups of all brands; naked wax and paraffin wax are not recommended.
4. 最高檔位下,建議單次工作時間不超過4個小時。At the highest temperature setting, it is recommended that the working time does not exceed 4 hours at a time.
5. 睡前需關閉電源,避免燈泡長時間工作,溫度過高。Turn off the power before bedtime to avoid prolonged bulb operation and excessive heat.
6. 鹵素燈泡有較大的發熱量,長時間使用時切勿觸碰燈罩、燈杆以及泡,避免燙傷。Halogen bulbs generate significant heat; do not touch the lampshade, lamp post, or bulb during prolonged use to avoid burns.
7. 由於長時間的燈光照射不能像明火燃燒一樣讓蠟燭揮發,所以加熱5-6次表面的精油揮發完畢,需要把蠟燭表面一層“沒有香味”的蠟倒掉。Due to prolonged light exposure, the candle does not vaporize like an flame. After heating 5-6 times, the essential oils on the surface will have evaporated. You need to remove the layer of "unscented" wax from the surface.
8. 本產品請勿在超過6度以.上斜面上使用,遠離易燃物品,切勿放在兒童觸碰得到的地方。Do not use this product on surfaces inclined above 6 degrees, keep away from flammable materials, and do not place it where children can reach it.
Q&A
1. 使用融蠟燈時,還需要點燃蠟燭嗎? Do I need to light the candle when using the wax melting lamp?
A: 不能No.
2. 蠟燭餘量不多,融蠟燈照射不到怎麼辦? What if the candle is low and the wax melting lamp can't reach it? A: 當蠟燭餘量不多時,可以將其墊高,從而讓融蠟燈進行工作。When the candle is low, you can elevate it to allow the wax melting lamp to work effectively.
3. 使用幾次後發現香味沒有之前濃郁? Why does the scent seem weaker after a few uses? A: 使用5-6次後,表面的精油揮發完畢,再加熱也無香味揮發,遂需倒掉表面一層融化的蠟油。After 5-6 uses, the essential oils on the surface will have evaporated. If you reheat, there will be no scent left, so you need to remove the melted wax layer from the surface.
1. 通電前,確保燈泡完全旋入燈泡底座內(轉不動爲止) Before powering on, ensure the bulb is fully screwed into the socket (it should not turn anymore).
2. 蠟面離燈泡不宜過近 The wax surface should not be too close to the bulb.
3. 適合各品牌蠟杯型的蠟燭使用,裸蠟、石蠟不建議使用。Suitable for use with candle cups of all brands; naked wax and paraffin wax are not recommended.
4. 最高檔位下,建議單次工作時間不超過4個小時。At the highest temperature setting, it is recommended that the working time does not exceed 4 hours at a time.
5. 睡前需關閉電源,避免燈泡長時間工作,溫度過高。Turn off the power before bedtime to avoid prolonged bulb operation and excessive heat.
6. 鹵素燈泡有較大的發熱量,長時間使用時切勿觸碰燈罩、燈杆以及泡,避免燙傷。Halogen bulbs generate significant heat; do not touch the lampshade, lamp post, or bulb during prolonged use to avoid burns.
7. 由於長時間的燈光照射不能像明火燃燒一樣讓蠟燭揮發,所以加熱5-6次表面的精油揮發完畢,需要把蠟燭表面一層“沒有香味”的蠟倒掉。Due to prolonged light exposure, the candle does not vaporize like an flame. After heating 5-6 times, the essential oils on the surface will have evaporated. You need to remove the layer of "unscented" wax from the surface.
8. 本產品請勿在超過6度以.上斜面上使用,遠離易燃物品,切勿放在兒童觸碰得到的地方。Do not use this product on surfaces inclined above 6 degrees, keep away from flammable materials, and do not place it where children can reach it.
Q&A
1. 使用融蠟燈時,還需要點燃蠟燭嗎? Do I need to light the candle when using the wax melting lamp?
A: 不能No.
2. 蠟燭餘量不多,融蠟燈照射不到怎麼辦? What if the candle is low and the wax melting lamp can't reach it? A: 當蠟燭餘量不多時,可以將其墊高,從而讓融蠟燈進行工作。When the candle is low, you can elevate it to allow the wax melting lamp to work effectively.
3. 使用幾次後發現香味沒有之前濃郁? Why does the scent seem weaker after a few uses? A: 使用5-6次後,表面的精油揮發完畢,再加熱也無香味揮發,遂需倒掉表面一層融化的蠟油。After 5-6 uses, the essential oils on the surface will have evaporated. If you reheat, there will be no scent left, so you need to remove the melted wax layer from the surface.







